|
|
Ȩ > Á¦Ç°¼Ò°³ > ¹ëºê > ´ÙÀ̾ÆÇÁ·¥¹ëºê |
|
|
TYPE 186 |
plastic piston actuator / pneumatically operated / DN 10 - 15 mm (1/4" - 1/2")
|
|
|
SED / Germany |
|
|
|
|
|
|
|
|
TYPE 186
pneumatically operated DN 10 - 15 mm (1/4" - 1/2") plastic piston actuator
Attributes
- Plastic piston actuator
- Compact design, the outside diameter of the actuator is of the same size as the bonnet flange
- Actuator high resistance to heat transfer
- Smooth exterior design ideal for wash downs
- Control air connection 90¡Æ to flow direction
- Encapsulated diaphragm
- Optical indicator
General
- Eliminated water hammer
- Depending on the diaphragm material, for all neutral and aggressive, gaseous and liquid media
- The flow can be in either direction
- Hermetic sealing
- The valve is unaffected by contaminated media
- Cavity free body
- Without any corrosion
Optional
- Available with a wide range of control equipment and accessories, also for retrofitting
Features
Control function : |
Pneumatically operated Normally closed (NC): Cf. 1 Normally open: Cf. 2 Double acting: Cf. 3 |
Direction Control connection: |
At Cf. 1, 2 and 3 90¡Æ to flow direction |
Max. working pressure: |
Unidirectional (delta p = 100%) EPDM, FPM, NBR diaphragm 6 bar PTFE/EPDM diaphragm 6 bar Higher working pressure may be achieved with different actuator |
Max. working temperature |
150¡ÆC, depending on application |
Control pressure: |
Cf. 1 4 - 7 bar Cf. 2 and 3 2 - 7 bar |
Diaphragm material and size: |
EPDM, PTFE/EPDM, NBR or FPM MA 10 for all body sizes |
End connection: |
Threated socket DIN ISO 228 Plain socket DIN Threated fitting Plain spigots DIN | |
|
|
|
|
|